2024 Leads4pass Free Latest IT Cert Exam Dumps

We share the latest exam dumps throughout the year to help you improve your skills and experience! The latest Cisco CCDP 300-115 exam dumps, online exam Practice test to test your strength, Cisco 300-115 “Implementing Cisco IP Switched Networks (SWITCH) v2.0” in https://www.leads4pass.com/300-115.html Update the exam content throughout the year to ensure that all exam content is authentic and valid. 300-115 PDF Online download for easy learning.

[PDF] Free Cisco CCDP 300-115 pdf dumps download from Google Drive: https://drive.google.com/open?id=1W4y0zB1TTjYPaoSt_iCuZ2D7lge3Bg3W

[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx

300-115 SWITCH – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/switch2.html

Free test Cisco CCDP 300-115 Exam Questions and Answers

QUESTION 1
Which feature is automatically configured when an administrator enables a voice VLAN?
A. 802.1Q trunking
B. PortFast
C. QoS
D. private VLANs
Correct Answer: B

 

QUESTION 2
When a Cisco Catalyst switch that is configured in VTP server mode is first booted, which two VLAN ranges are loaded
on the switch? (Choose two)
A. All VLANs are in the VLAN database
B. VLANs greater than 1005 in the startup-config file
C. The first 1005 VLANs in the VLAN database file
D. The first 1005 VLANs in the startup-config file
E. VLANs greater than 1005 in the VLAN database file
Correct Answer: BC

 

QUESTION 3
Refer to the exhibit.

What is the result of the SPAN configuration on a Cisco switch?
A. Configure a SPAN session to monitor the received traffic on interface g0/4 only for VLAN 3.
B. Configure a SPAN session to monitor the received traffic on interface g0/4 for all VLANs except VLAN 3.
C. Configure a SPAN session to monitor the received traffic on interface g0/5 only for VLAN 3.
D. Configure a SPAN session to monitor the received traffic on interface g0/5 for all VLANs except VLAN 3.
Correct Answer: A

 

QUESTION 4
A network engineer is installing a switch for temporary workers to connect to. The engineer does not want this switch
participating in Spanning Tree with the rest of the network; however, end user connectivity is still required. Which
spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable
Correct Answer: B

 

QUESTION 5
In a switch stack, where is the SDM template stored?
A. All switches in the stack
B. Master switch
C. Flash memory
D. Another
Correct Answer: B

 

QUESTION 6
Refer to the exhibit.

Which effect of this configuration is true?
A. The switch port continues to negotiate an EtherChannel even when there are configuration discrepancies between
the two ports
B. Spanning tree blocks EtherChannel formation on the device
C. The switch port error disables when a port attempts to form an EtherChannel with a port that has a different
configuration
D. Spanning tree is disabled if the switch port establishes an EtherChannel
Correct Answer: C

 

QUESTION 7
If switch SW1 is connected in a mesh with four other switches and all switches retain the default configuration, which
command do you enter on the SW1 interface to make it the root bridge for all VLANs?
A. SW1(config)#spanning-tree port-priority 129
B. SW1(config)#spanning-tree port-priority 127
C. SW1(config-if)#spanning-tree port-priority 129
D. SW1(config-if)#spanning-tree port-priority 127
Correct Answer: D

 

QUESTION 8
Refer to the exhibit.

Which EtherChannel negotiation protocol is configured on the interface f0/13 f0/15?
A. Link Combination Control Protocol
B. Port Aggregation Protocol
C. Port Combination Protocol
D. Link Aggregation Control Protocol
Correct Answer: B
PAgP modes are off, auto, desirable, and on. Only the combinations auto-desirable, desirable- desirable, and on-on will
allow a channel to be formed… 
1.
on: PAgP will not run. The channel is forced to come up.
2.
off: PAgP will not run. The channel is forced to remain down.
3.
auto: PAgP is running passively. The formation of a channel is desired; however, it is not initiated.
4.
desirable: PAgP is running actively. The formation of a channel is desired and initiated. The Link Aggregate Control
Protocol (LACP) trunking supports four modes of operation:
On: The link aggregation is forced to be formed without any LACP negotiation. In other words, the switch neither sends
the LACP packet nor processes any inbound LACP packet. This is similar to the state for PAgP.
Off: The link aggregation is not formed. We do not send or understand the LACP packet.
This is similar to the off state for PAgP.
Passive: The switch does not initiate the channel but does understand inbound LACP packets. The peer (in an active state)
initiates negotiation (when it sends out an LACP packet) which we receive an answer, eventually to form the aggregation channel with the peer. This is similar to the auto mode in PAgP.
Active: We can form an aggregate link and initiate the negotiation. The link aggregate is formed if the other end runs in
LACP active or passive mode. This is similar to the desirable mode of PAgP. In this example, we see that a 0/13,
fa0/14, and fa0/15 are all in Port-Channel 12, which is operating in desirable mode, which is only a PAgP mode.

 

QUESTION 9
Select and Place:

Correct Answer:

 

QUESTION 10
While working in the core network building, a technician accidentally bumps the fiber connection between two core
switches and damages one of the pairs of fiber. As designed, the link was placed into a non- forwarding state due to a
fault with UDLD. After the damaged cable was replaced, the link did not recover. What solution allows the network
switch to automatically recover from such an issue?
A. macros
B. errdisable auto recovery 
C. IP Event Dampening
D. command aliases
E. Bidirectional Forwarding Detection
Correct Answer: B
There are a number of events which can disable a link on a Catalyst switch, such as the detection of a loopback, UDLD
failure, or a broadcast storm. By default, manual intervention by an administrator is necessary to restore the interface to
working order; this can be done by issuing a shutdown followed by no shutdown on the interface. The idea behind
requiring administrative action is so that a human engineer can intercede, assess, and (ideally) correct the issue.
However, some configurations may be prone to accidental violations, and a steady recurrence of these can amount to a
huge time sink for the administrative staff. This is where errdisable auto-recovery can be of great assistance. We can
configure the switch to automatically re-enable any error-disabled interfaces after a specified timeout period. This gives
the offending issue a chance to be cleared by the user (for example, by removing an unapproved device) without the
need for administrative intervention. Reference: http://packetlife.net/blog/2009/sep/14/errdisable-autorecovery/

 

QUESTION 11
Drag and drop the characteristic from the left to the matching STP category on the right.
Select and Place:

Correct Answer:

 

QUESTION 12
LLDP-TLV
Select and Place:

Correct Answer:

 

QUESTION 13
Which statement about SPAN functionality for an EtherChannel group is true?
A. It can be configured as a SPAN source or a SPAN destination port.
B. It can be configured as a SPAN source but not as a SPAN destination port.
C. It can be configured as a SPAN destination but not as a SPAN source port.
D. It cannot be configured as a SPAN source or a SPAN destination port.
Correct Answer: B

We share 13 of the latest Cisco CCDP 300-115 exam dumps and 300-115 pdf online download for free. Now you know what you’re capable of! If you’re just interested in this, please keep an eye on “examdumpstraining.com” blog updates! If you want to get the Cisco CCDP 300-115 Exam Certificate: https://www.leads4pass.com/300-115.html (Total questions: 1067 Q&A).

Related 300-115 Popular Exam resources

title	pdf	youtube	300-115 SWITCH – Cisco	lead4pass
Cisco 300-115	lead4pass 300-115 dumps pdf	lead4pass 300-115 youtube	300-115 SWITCH – Cisco	https://www.leads4pass.com/300-115.html
Cisco CCDP				https://www.leads4pass.com/300-115.html
				https://www.leads4pass.com/300-101.html
				https://www.leads4pass.com/300-320.html
				https://www.leads4pass.com/642-871.html
				https://www.leads4pass.com/642-873.html
				https://www.leads4pass.com/642-874.html

Lead4pass Promo Code 12% Off

Why Choose Lead4pass?

Lead4Pass helps you pass the exam easily! We compare data from all websites in the network, other sites are expensive,
and the data is not up to date, Lead4pass updates data throughout the year. The pass rate of the exam is above 98.9%.

[2017 Latest Exam Dumps] Fortinet Network Security,NSE 5 NSE5 Dumps Exam Materials And Youtube Update Free Try