2024 Leads4pass Free Latest IT Cert Exam Dumps

High Quality Latest EMC, Microsoft, Cisco, CompTIA, VMware And Other IT Cert Exam Dumps With 100% Pass Guarantee

[Update Dec 2022] Latest 200-301 dumps to help you pass the Cisco CCNA certification exam

ccna 200-301 Update Dec 2022

Using Lead4Pass 200-301 dumps can help you successfully pass the Cisco CCNA certification exam on your first attempt.

Because 200-301 dumps have many success advantages:

  1. Lightweight Learning Tool (PDF+VCE)
  2. More free usage time (365 days Free Update)
  3. Covers all Cisco CCNA practical exam questions and answers, with explanations of difficult problems
  4. Have a professional Cisco technical team service

So why not use 200-301 dumps to help you easily and successfully pass the exam? And Lead4Pass, as the provider of 200-301 dumps, has many years of industry reputation, is the industry leader, and is trustworthy, what else do you have to worry about?

Therefore, it is strongly recommended that you use the 200-301 dumps https://www.leads4pass.com/200-301.html (PDF +VCE), which is up to date throughout the year, to prepare you for a career leap.

More detailed 200-301 CCNA certification information:

Vendor: Cisco
Exam Code: 200-301
Exam Name: Implementing and Administering Cisco Solutions (Include 2022 Newest Simulation Labs)
Certification: CCNA
Duration: 120 minutes
Languages: English and Japanese
Price: $300 USD
Number of Questions: 120
200-301 dumpshttps://www.leads4pass.com/200-301.html (959 Q&A | Include Newest Simulation Labs)

Sharing some latest CCNA 200-301 dump PDFs for reference




Share some latest CCNA 200-301 dumps exam questions and answers

Number of exam questionsExam nameFromRelease timeLast updated
15Implementing and Administering Cisco Solutions (CCNA)Lead4PassDec 01, 2022200-301 dumps
New Question 1:

Which network action occurs within the data plane?

A. compare the destination IP address to the IP routing table.

B. run routing protocols (OSPF, EIGRP, RIP, BGP)

C. make a configuration change from an incoming NETCONF RPC

D. reply to an incoming ICMP echo request

Correct Answer: A

New Question 2:

Which action implements physical access control as part of the security program of an organization?

A. configuring a password for the console port

B. backing up syslogs at a remote location

C. configuring enable passwords on network devices

D. setting up IP cameras to monitor key infrastructure

Correct Answer: A

New Question 3:

Refer to the exhibit.

new 200-301 dumps questions 3

A frame on VLAN 1 on switch S1 is sent to switch S2 where the frame is received on VLAN 2. What causes this behavior?

A. trunk mode mismatches

B. allowing only VLAN 2 on the destination

C. native VLAN mismatches

D. VLANs that do not correspond to a unique IP subnet

Correct Answer: C

Untagged frames are encapsulated with the native VLAN. In this case, the native VLANs are different so although S1 will tag it as VLAN 1 it will be received by S2.

New Question 4:

Which two statements are true about the command ip route (Choose two.)

A. It establishes a static route to the network.

B. It establishes a static route to the network.

C. It configures the router to send any traffic for an unknown destination to the network.

D. It configures the router to send any traffic for an unknown destination out of the interface with the address

E. It uses the default administrative distance.

F. It is a route that would be used last if other routes to the same destination exist.

Correct Answer: AE

New Question 5:

An organization has implemented Cisco Firepower without IPS capabilities and now wants to enable inspection for their traffic. They need to be able to detect protocol anomalies and utilize the Snort rule sets to detect malicious behavior. How is this accomplished?

A. Modify the network discovery policy to detect new hosts to inspect.

B. Modify the access control policy to redirect interesting traffic to the engine.

C. Modify the intrusion policy to determine the minimum severity of an event to inspect.

D. Modify the network analysis policy to process the packets for inspection.

Correct Answer: D


https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdm- intrusion.html

New Question 6:

Which WAN access technology is preferred for a small office/home office architecture?

A. broadband cable access

B. frame-relay packet switching

C. dedicated point-to-point leased line

D. Integrated Services Digital Network switching.

Correct Answer: A

New Question 7:

Which IPv6 address is valid?

A. 2001:0db8:0000:130F:0000:0000:08GC:140B

B. 2001:0db8:0:130H::87C:140B

C. 2031::130F::9C0:876A:130B

D. 2031:0:130F::9C0:876A:130B

Correct Answer: D

An IPv6 address is represented as eight groups of four hexadecimal digits, each group representing 16 bits (two octets). The groups are separated by colons (:). An example of an IPv6 address is 2001:0db8:85a3:0000:0000:8a2e:0370:7334. The leading 0\’s in a group can be collapsed using::, but this can only be done once in an IP address.

New Question 8:

Refer to the exhibit.

new 200-301 dumps questions 8

The network administrator must prevent the switch CertBus-Cat9K-2 IP address from being visible in LLDP without disabling the protocol. Which action must be taken to complete the task?

A. Configure the no lldp tlv-select-management-address command globally on CertBus-Cat9K-2

B. Configure the no lldp transmit command on interface G1/0/21 in CertBus-Cat9K-1

C. Configure the no lldp receive command on interface G1/0/21 on CertBus-Cat9K-1

D. Configure the no lldp mac-phy-cfg command globally on CertBus-Cat9K-2

Correct Answer: A

New Question 9:

Which field within the access-request packet is encrypted by RADIUS?

A. authorized services

B. password

C. authenticator

D. username

Correct Answer: B

New Question 10:

A network engineer must configure two new subnets using the address block to meet these requirements:


The first subnet must support 24 hosts.


The second subnet must support 472 hosts.


Both subnets must use the longest subnet mask possible from the address block.

Which two configurations must be used to configure the new subnets and meet a requirement to use the first available address in each subnet for the router interfaces? (Choose two.)

A. interface VLAN 1148 IP address

B. interface VLAN 3002 IP address

C. interface VLAN 4722 IP address

D. interface VLAN 1234 IP address

E. interface VLAN 155 IP address

Correct Answer: AE

New Question 11:

Which WAN topology has the highest degree of reliability?

A. full mesh

B. Point-to-point

C. hub-and-spoke

D. router-on-a-stick

Correct Answer: A

New Question 12:

How is the native VLAN secured in a network?

A. separate from other VLANs within the administrative domain

B. give it a value in the private VLAN range

C. assign it as VLAN 1

D. configure it as a different VLAN ID on each end of the link

Correct Answer: A

New Question 13:

When implementing a router as a DHCP server, which two features must be configured? (Choose two)

A. relay agent information

B. address pool

C. smart-relay

D. database agent

E. manual bindings

Correct Answer: BE

New Question 14:

What is the destination MAC address of a broadcast frame?

A. 00:00:0c:07:ac:01

B. ff:ff:ff:ff:ff:ff

C. 43:2e:08:00:00:0c

D. 00:00:0c:43:2e:08

E. 00:00:0c:ff:ff:ff

Correct Answer: B

New Question 15:

Which command must be entered when a device is configured as an NTP server?

A. NTP peer

B. NTP master

C. NTP authenticate

D. NTP server

Correct Answer: B

The CCNA (200-301) certification is an independent certification exam and the only core certification exam. Select Lead4Pass 200-301 dumps https://www.leads4pass.com/200-301.html,
Helping you 100% pass the Cisco CCNA certification exam.

About the author

Share free EMC IT certification exam questions (CLOUD, CONVERGED INFRASTRUCTURE, DATA PROTECTION, DATA SCIENCE, NETWORKING, SECURITY, SERVERS, Dell Technologies vSAN Ready Node...). Participate in EMC community practice and use community recommendations to easily pass the exam.